No matter what your HVAC questions are, the experts at Korando Heating & Cooling, Inc. in Chester have answers. Whether you have questions about picking new HVAC equipment to best practices on care and maintenance, we can assist. Our online FAQs answers provide a fast response for your convenience, but if you want to know more on any topic, don’t hesitate to give us a call at 618-826-2151.

Just like you need to take your car in to the shop for normal tune-ups, such as oil changes or looking at probable problems, your home comfort system should receive the same kind of attention. Routine maintenance by a trained technician provides various benefits to your HVAC equipment, which can help your systems operate efficiently and prevent costly breakdowns.
The cost can fluctuate depending on the equipment size and different features, so we advise contacting Korando Heating & Cooling, Inc. at 618-826-2151 to get a quote.
Two-stage heating enables the furnace to heat at two levels of output: high for cold winter days and low for mild ones. Around 80 percent of the time, your homes heating requirements can be met when the furnace is left on the low setting, enabling your two-stage unit to run for longer periods of time. Two-stage units also give more even heat distribution, fewer temperature swings, quiet operation, improved air filtration and energy efficiency.
Korando Heating & Cooling, Inc. has an assortment of brands and models that are more efficient than ever and make it easier to find the best match for your home. There are innovative systems that make heating or cooling your home more automatic, functioning similar to cruise control to make tiny adjustments to help meet your comfort demands with energy efficiency. Contact us at 618-826-2151 to learn more about the technology we carry.
Depending on how old your previous furnace was, you could experience a number of differences. Furnaces today are created to offer more even and efficient heating than ever before. Modern furnaces also better regulate temperature and air flow, moving more air over the heat exchanger than older furnaces.

Additionally, new furnaces are created to operate with other high-efficiency HVAC products, such as air conditioners. The air conditioner blowers provide your heating system an extra boost so it can deliver cool air around your home efficiently. Special features like variable speed motors will also help decrease noise associated with operating your equipment and easily meet your family’s airflow needs.

The Department of Energy recently boosted the minimum efficiency levels for air conditioners, heat pumps and packaged units created after Jan. 1, 2015, since heating and cooling contributes significantly to a homes total energy usage. The requirements vary by region, so call Korando Heating & Cooling, Inc. for the efficiency standards for Chester.
Korando Heating & Cooling, Inc. has a number of HVAC products with high-efficiency ratings, which can help lower the amount of energy they require to operate. Aside from choosing products that have received Energy Star® certification or achieved high SEER ratings for air conditioners or AFUE ratings for furnaces, you can consider the following:

  • Making certain that your system receives routine maintenance by a trained professional can keep your system operating at its top performance.
  • Zoning systems enable you to heat or cool only certain areas of your home, so you wont have to pay to heat or cool spaces that you don’t typically utilize.
  • Installing a programmable thermostat allows you to set the temperature in your home around your schedule. They can be programmed to give you the comfort you want when you’re home and increase or decrease the temperature while you’re not around, helping you save on heating and cooling costs.
Korando Heating & Cooling, Inc. is well-known in the Chester area and you can depend on them to provide quality home comfort products. We feature a variety of innovative and high-quality products. We are dedicated to offering customers high-quality service and will make sure you find the appropriate solution for your home.
Improving your home’s indoor air quality starts with four basic strategies:

    • Poor indoor air quality leaves your home with lots of air pollutants floating around. So, to increase IAQ, the first step is to get rid of as many pollutants as possible. You can easily do this by cleaning and vacuuming at least one time during the week, frequently washing linens and storing cleaning products safely.
    • Proper insulation is ideal for keeping your home warm in the winter and cool in the summer, but it also makes it difficult for airborne pollutants to escape. We carry products that help swap stale air for fresh, filtered outside air.
    • Good ventilation and ongoing cleaning are a start, but air filters, germicidal lights and purification systems take your IAQ to the next level by capturing microscopic particles, killing germs and eliminating particles while destroying chemical vapors.
    • Programmable thermostats will help control the humidity levels and temperature to help stop particles and germs from building up while also keeping your home comfortable.

We suggest that you meet with one of the technicians at Korando Heating & Cooling, Inc. and have them evaluate your home and current indoor comfort system. We can help you choose which equipment will be best suited to meet your needs.

Lots of homeowners believe that air conditioners make your home cooler, but it actually removes the heat from your home, sending the hot air outside. That hot air moves across a cold indoor coil where refrigerant in the lines sends the heat to the coil in your outdoor unit, releasing the heat outside. This process continues until the indoor temperature reaches the desired level that you set on your thermostat.
Due to the amount of energy used by heating and cooling systems, the Department of Energy (DOE) hiked up the minimum efficiency levels for air conditioners, heat pumps and packaged units manufactured after January 1, 2015. These levels are determined by region and carry varying requirements based on your location. Korando Heating & Cooling, Inc. can help answer any questions you may have regarding these minimum requirements and let you know what choices are available when you’re searching for a replacement system.
You can find these numbers on a nameplate or sticker that is near your systems service panel. The sticker is white with black letters and have both of these numbers located around the top of the sticker. M/N denotes model number while S/N is your serial number.
There are a couple ways to determine what size system is right for your home, but the most reliable way to choose a system is by having your local Korando Heating & Cooling, Inc. technician come out and perform a load calculation. This calculation considers your homes: square footage, insulation value, amount of insulation, and a variety of other factors.
The short answer is Yes, because dirt and other debris can impede your systems ability to work efficiently. For heat pumps, it is common to have frost or ice on them during the winter, but they also are built with defrost controls to ensure they work efficiently in that type of weather.
Two-stage cooling means that your cooling unit has two levels of operation. When summer is its warmest, the high setting kicks in, and when its cooler or more mild, it operates on the low setting. Most of the time, the lower setting will take care of your cooling needs, but even when the high setting starts up, you may not realize it because it can produce such even temperatures for your comfort. This may also mean a quieter cooling system, greater efficiency and improved humidity control.
When your cooling unit freezes up, there are a couple of reasons why it could be doing so. The most common reasons include: dirty filters, low refrigerant, a dirty evaporative coil and a faulty blower motor or relay. A dirty filter is something you can take care of as a homeowner, but the others need to be fixed by a professional like those at Korando Heating & Cooling, Inc.. Contact them at 618-826-2151 with any additional questions.
Choosing the best thermostat for your cooling system comes with a lot of considerations. Thats why its nice to have such a wide variety of choices from Korando Heating & Cooling, Inc.. Whether you’re searching for a programmable or non-programmable thermostat or want to join the smart home trend, there are various thermostats that you have to pick from. Some thermostats will depend on what type of heating and cooling system you have, but the experts at Korando Heating & Cooling, Inc. will be able to help determine what options are best for your needs and your budget.
Heat pumps can be a little confusing due to their name, but they actually take care of both your heating and cooling needs throughout the year. When its hot outside it operates like an air conditioner in that it removes heat from your home, but when it cools off, the process gets turned around and it collects heat from outside and brings it inside. Heat pumps are also very efficient, and may produce up to two or three times more heat than the energy it uses.

Of course we suggest you also replace your indoor system, but this is why:

      • All outdoor cooling systems have a matching indoor unit that they are created to work with to ensure efficient performance. When they aren’t paired with the other part as a total system, efficiency may suffer.
      • As with most products, advancements have brought about newer, more efficient ways of doing things. Heating and cooling systems are no different. These advances most importantly include greater heating and cooling efficiency, but also include improved air handling, filtering and noise pollution reduction to name a few.
      • Heating and cooling systems that are more than 10-15 years old normally need to be replaced. Not only do they consist of outdated technology, but they are also less efficient than more recent models. Getting a new indoor unit at the same time means you’ll have a matched system to provide you with improved comfort and efficiency for years to come.
The communication module on your home energy system could send the system’s performance records for each module to a website. You can visit this website to learn more about the system’s status, energy production and environmental benefits. The site also displays carbon offsets as it happens.
In most areas, rain will naturally clean the solar modules. If you are located in a dusty or industrial area, periodically spraying the modules with water can help improve performance. However, detergents and high-pressure hoses should never be used to rinse solar modules.
The best thermostat for you depends on your heating and cooling equipment. Korando Heating & Cooling, Inc. sells programmable and nonprogrammable thermostats that can help improve the efficiency of your HVAC systems. View our available products or contact us at 618-826-2151 to learn more.
Heating and cooling can make up a large part of your utility bill. The innovative and high-efficiency heating and air conditioning products available from Korando Heating & Cooling, Inc. can help decrease these costs. If you’re searching for a new heating or cooling system, look for products with high SEER ratings for air conditioners and AFUE ratings for furnaces. SEER and AFUE are a measure of system efficiency, and the higher the number, the more efficient the product. Besides purchasing a new home comfort system, think about these additional factors:

      1. Is your system regularly maintained? Whether it’s a furnace or air conditioner, HVAC systems will operate more efficiently after regular maintenance checks.
      2. Do you need a zoning system? If there are areas in your home that are rarely used, a zoning system will allow you to heat or cool only the most used areas of your house.
      3. Have you installed a programmable or smart thermostat? According to the U.S. Department of Energy, programmable thermostats may reduce your heating costs by up to 35 percent, and your cooling costs by up to 25 percent.

Zoning equipment gives you the ability to section off portions of your home and control the temperature differently in each area. These systems are good for when you have areas of your house that are rarely used or when you and your family are constantly in disagreement of how hot or cold it ought to be inside. Zoning systems are almost noiseless and efficient, enabling you to have more control over the comfort of your home. Learn more about the zoning systems available from Korando Heating & Cooling, Inc..